Product Selector Copy
BackAre you ready to get started? Explore below using our Product Selector, complete the REQUEST FOR QUOTE, and we’ll contact you shortly with a flow measurement solution and expert answers to your flow measurement questions.
Is your application custom? Tell us a little about yourself and your custom flow needs. A Hoffer product specialist will contact you to help you determine which of our solutions will be best for you, and we’ll provide you a quote.
Product Selector
| FLOW METER SELECTION GUIDE-LIQUIDS |  |
||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| PRODUCT FAMILY/SERIES |
SIZES AVAILABLE |
FLOW RANGE | NOTABLE SPECS | CALIBRATIONS | TYPE OF METER | CLEAN LIQUID |
DIRTY LIQUID (SLURRY) |
CORROSIVE | VISCOUS | CRYOGENIC | BI-DIRECTIONAL OPTION |
| HO LIQUID | 1/4″thru12″ | 0625 to 15,000 GPM | +/-.5% linearity | 12-point water Cal NIST traceable. HFC can provide water Cals upto 1500 GPM. Higher flow rates are extrapolated. 10″ & 12″ size meters are Calibrated at Utah or Alden. |
Inline axial industrial |  |
 |
 |
Up to 300 cST Note 1
|
|
|
| API SERIES CUSTODY TRANSFER |
1″ thru 4″ | 6 to 1,500GPM | +/-.25% linearity (optional+/-.15%) |
12-point water Cal NIST traceable. HFC can provide water Cals up to 1500 GPM. Higher flow rates are extrapolated. 10″ & 12″ size meters are Calibrated at Utah or Alden. |
Custody transfer of liquid petroleum products |
|
|
|
Up to 300 cST Note1 
|
|
|
| CT SERIES CUSTODY TRANSFER RIM |
4″ thru 12″ | 120 to 15,000 GPM | +/-.15% linearity | 12-point water Cal NIST traceable. HFC can provide water Cals up to 1500 GPM. Higher flow rates are extrapolated. 10″ & 12″ size meters are Calibrated at Utah or Alden. |
High performance | |
|
|
Upto300cST Note1
|
|
|
| MF SERIES – LIQUID | 1/2″ end connections |
.007 to 3.5 GPM | +/-1% linearity | 12-point water Cal NIST traceable. | Low flow | |
|
|
25 cST Maximum
|
|
|
| STAR SERIES | 1/4 thru 3″ | 35 to 650 GPM | +/-1% linearity | Average K-factor etched on meter housing. K-factor derived from 3 point water Calibration. |
Lower cost than HO | |
|
|
|
|
|
| LO-CO SERIES | 1/4″ thru 2″ | 45 to 225 GPM | +/-1% linearity | Average K-factor etched on meter housing. | Lowest cost available | |
|
|
|
|
|
| SANITARY SERIES | 1/4″ thru 3″ | 25 to 650 GPM | +/-.5% linearity* | 12-point water Cal NIST traceable. | Suitable of pharma, food&beverage | |
|
|
|
|
|
| TEFLON SERIES | 1/4″ thru 3″ | 35 to 485 GPM | +/-1% linearity | 12-point water Cal NIST traceable. | Caustic & aggressive fluids | |
|
|
|
|
|
| WECO – LIQUID | 1″ thru 4″ | 4 to 1, 500 GPM | +/-.5% linearity | 12-point water Cal NIST traceable. | High pressure oil patch | |
|
|
|
|
|
| GROOVED – LIQUID | 1″ thru 12″ | 2 to 12,000 GPM | +/-.5% linearity | 12-point water Cal NIST traceable. HFC can provide water Cals up to 1500 GPM. Higher flow rates are extrapolated. 10″&12″ size meters are Calibrated at Utah or Alden. |
Low pressure oil patch | |
|
|
|
|
|
| HOG SERIES | 1″end connections |
.4 – 25 GPM | +/-.25% linearity | 12-point Cal at approx. 100 cstks. | High viscosity liquids>100 CSTK | |
|
|
|
|
|
| HP SERIES – LIQUID | 4″ line size & larger | .25 tp 50 FPS | +/-1% linearity | 12-point water Cal NIST traceable in FPS. | insertion flow meter | |
|
|
Consult Factory
|
|
|
| HHP (HIGHPRESSURE) -LIQUID |
1/4″ thru 2″ | .0625 to 275 GPM | +/-.5% linearity* | 12-point water Cal NIST traceable. | High pressure flanged | |
|
|
Up to 300cST Note1
|
|
|
| HOSEBARB – LIQUID | 1/4″ thru 3″ | .0625 to 800 GPM | +/-.5% linearity* | 12-point water Cal NIST traceable. | Typically used as “quick connect” | |
|
|
Up to 300 cST Note1
|
|
|
| AUTOCLAVE – LIQUID | 1/4″ thru 3/4″ | .0625 to 35 GPM | +/-.5% linearity* | 12-point water Cal NIST traceable. | High pressure threaded connections. Up to 20,000 PSI |
|
|
|
Up to 300 cST Note1
|
|
|
| SHORT WAFER – LIQUID | 5/8 thru 8″ | .2 to 6, 400 GPM | +/-.5% linearity | 12-point water Cal NIST traceable. | Cost savings flanged meter solution Up to 20,000PSI |
|
|
|
Up to 300 cST Note1
|
|
|
| TRI – FLO – LIQUID | 1″ thru 2″ | 4 to 260 GPM | +/-1% linearity | 12-point water Cal NIST traceable. | Insertion, low cost, flowmeter | |
|
|
|
|
|
| STEAMJACKETED-LIQUID | 1/4″ thru3 “ | .25 to 800 GPM | +/-.5% linearity* | 12-point water Cal NIST traceable. | Used on liquid applications where liquids may solidify | |
|
|
|
|
|
Note1:In-house viscosity calibrations are limited to 100cST up to 60 GPM. Thirdparty viscosity calibrations are required for flowrated > than 60 GPM and viscosities from 100 to 300 cST.
| LEGEND | SUITABLE= |
NOT SUITABLE= |
APPLICATION DEPENDENT= |
MAYBE SUITABLE DEPENDING ON METER CONSTRUCTION= |
|---|
*+/-1.0%linearityon1/4″meter
FLOWMETERS BY INDUSTRY []
LIQUID TURBINE FLOWMETER APPLICATIONSAND GAS TURBINE FLOWMETER APPLICATIONS[]
-
Liquid Applications
We provide best solutions that will meet the extreme conditions
associated with your subsea and oil and gas applications.LEARN MORE []We provide best solutions that will meet the extreme conditions associated with your subsea and oil and gas applications.
-
Gas Applications
We offer complete flow measurement packages for the offshore drilling, production and well-servicing environments.
LEARN MORE []We offer complete flow measurement packages for the offshore drilling, production and well-servicing environments.
VISIT OUR BLOG: FLOW INSIDER
Read Hoffer Flow Controls products, news, and announcements regarding private markets, Federal agencies, the US military using Hoffer Flow Control flowmeters, and much more.
READ MORE
FEATURED VIDEO
RESOURCES
The Hoffer Collection
View our complete collection of product offerings and other valuable information.
Location []
